Skip to main content
NetApp Knowledge Base site will be down for 3 hours between Oct 26, 23:59 PST and Oct 27, 02:59 PST, for system maintenance and infrastructure update.
NetApp Stage KB

E-Series

 

Other Resources
  • SANtricity OS_KbsSat, 29 Apr 2023
  • E-Series Web Server not respondingWed, 11 Jan 2023
  • Write-back caching forcibly disabled with BAD BBUWed, 11 Jan 2023
  • Wrong reports E-Series Power supply failed CRITICALWed, 11 Jan 2023
  • What is the command to launch the scheduled Cassandra reaper manually?Wed, 11 Jan 2023
  • What NetApp E-Series storage systems support NTP?Wed, 11 Jan 2023
  • What Support Data does NetApp need for E-Series performance troubleshooting?Wed, 11 Jan 2023
  • Why do "power supply failed" events get triggered due to power-off?Wed, 11 Jan 2023
  • Why does Write-back caching forcibly disabled alert appear during controller reboot/failure/upgradeWed, 11 Jan 2023
  • Why E-Series volume expansion for one volume when using  Volume Group is very slow ?Wed, 11 Jan 2023
  • Will manually asynchronous mirroring stop if reserved capacity gets full?Wed, 11 Jan 2023
  • Windows Disk Management doesn't show the Access volume after installing SANtricity Windows DSMWed, 11 Jan 2023
  • Windows Host loses connection with LUNs very often from E-SeriesWed, 11 Jan 2023
  • Windows sees E-Series LUNs as offline after rebooting hostsWed, 11 Jan 2023
  • Write-back caching forcibly disabled and Cache Backup Device status is unknowWed, 11 Jan 2023
  • Write-Back Caching Forcibly Disabled Error Not ClearingWed, 11 Jan 2023
  • VMware snapshots stun and unstun times are to longWed, 11 Jan 2023
  • What happens if reserved capacity gets full during E-Series online volumeCopy?Wed, 11 Jan 2023
  • Unable to set IP address on E-Series controller for StorageGRIDWed, 11 Jan 2023
  • unable to ssh login E2800 controllerWed, 11 Jan 2023
  • E-Series Failed Volume recovery for traditional Volume Groups on pre-8.40.40.00/8.52.00.00 releasesFri, 09 Aug 2024
  • SANtricity OS_KbsThu, 08 Aug 2024
  • "Controller wide port has gone to failed state" during SANtricity upgrade "Controller wide port has gone to failed state" during SANtricity upgrade "Controller wide port has gone to failed state" during SANtricity. upgradeFri, 02 Aug 2024
  • Why E-Series volume expansion for one volume when using  Volume Group is very slow ?Thu, 01 Aug 2024
  • E-Series performance resolution guideFri, 24 May 2024
  • E-Series Impending drive failure detected by drive - AutoSupport MessageTue, 02 Jan 2024
  • Mgmt_KbsTue, 02 May 2023
  • E-Series SANtricity System Manager user login via SAML Microsoft Azure provider fails with HTTP 404 return codeWed, 11 Jan 2023
  • No description of alerts sent to external Syslog server using SplunkWed, 11 Jan 2023
  • StorageGRID Upgrade 11.0.1 to 11.1.1 stuck at Starting services with Error: rsm failed to startWed, 11 Jan 2023
  • Thermal Ambient Sensor in UNKNOWN state and front display panel offWed, 11 Jan 2023
  • Unreadable sectors on the E-series platformsWed, 11 Jan 2023
  • Cannot change feature pack from NVMe over FC to NVMe over IBWed, 11 Jan 2023
  • E-Series after drive replacement it reports FAILED_VOLUME-Recovery Failure Type Code: 17Wed, 11 Jan 2023
  • E-Series Web Server not respondingWed, 11 Jan 2023
  • How to downgrade E-Series SANtricity OS from 11.70.x to 11.60.xWed, 11 Jan 2023
  • How to manually reconstruct a drive in E-Series storageWed, 11 Jan 2023
  • How to manually replace a driveWed, 11 Jan 2023
  • SANtricity Pre-Upgrade Health Check Has Found ProblemsWed, 11 Jan 2023
  • Unable to create a Volume Copy of E-Series Snapshot Volume after upgrade to 11.70.1.GA or laterWed, 11 Jan 2023

Add code for Video content

test

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange