Skip to main content
NetApp Stage KB

Metrocluster configuration-settings connection connect fails

  1. Last updated
  2. Save as PDF
Views:
1
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

 

 

Applies to

  • New MetroCluster IP installation
  • Core-edge network architecture
  • ONTAP 9

Issue

The metrocluster configuration-settings connection connect command fails whilst configuring the new MetroCluster IP system
 
Example:

ClusterA::> metrocluster configuration-settings connection connect

Warning: This operation configures the connections between partner nodes using
         the interfaces configured for the nodes in a MetroCluster over IP
         configuration. These interfaces cannot be changed after using the
         "metrocluster configure" command.
Do you want to continue? {y|n}: y
[Job 480] Checking the network endpoints from the local cluster.[Job 480] Job failed: Did not receive a "ping" response using the network
addresses "10.1.1.1" and "10.1.1.3" on node "ClusterA-01" in cluster "ClusterA". Use
the "metrocluster operation show" command to view detailed error information.
Resolve the errors, then try the command again.

ClusterA::> "metrocluster operation show
ClusterA::> metrocluster operation show
       Operation: connect
           State: failed
      Start Time: 1/11/2022 08:00:00
        End Time: 1/11/2022 09:00:00
          Errors: Did not receive a "ping" response using the network addresses "10.1.1.1" and "10.1.1.3" on node "ClusterA" in cluster "ClusterA".

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.