Skip to main content
NetApp Stage KB

MetroCluster IP/iSCSI LIF is not using the expected interface on the partner cluster

  1. Last updated
  2. Save as PDF
Views:
1
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

 

 

Applies to

ONTAP 9
MetroCluster

Issue

The network interface show output on each cluster reports that the home port for a LIF on a DR Vserver is not the same interface as that used on the source cluster for this Vserver.

clusterA::> network interface show
  (network interface show)
            Logical    Status     Network            Current       Current Is
Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
----------- ---------- ---------- ------------------ ------------- ------- ----
vserver
            lif1         up/up    10.10.100.10/24    clusterA-01    e0c     true
            lif2         up/up    10.10.100.11/24    clusterA-02    e0d     true
            lif4         up/up    10.10.100.12/24    clusterA-02    vlan-11 true

                 
clusterB::> network interface show
  (network interface show)
            Logical    Status     Network            Current       Current Is
Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
----------- ---------- ---------- ------------------ ------------- ------- ----                                        
vserver-mc
            lif1         up/down  10.10.100.10/24    clusterB-02   e0e     true
            lif2         up/down  10.10.100.11/24    clusterB-01   e0c     true
            lif4         up/down  10.10.100.12/24    clusterB-01   vlan-22 true

 

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.