Skip to main content
NetApp Stage KB

ATTO 7500N/7600N FibreBridge will not boot with Critical Software Error Detected by duplicate IP Address

  1. Last updated
  2. Save as PDF
Views:
1
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

 

 

Applies to

  • ATTO 7500N FibreBridge
  • ATTO 7600N FibreBridge
  • Unsecured FibreBridge(s)

Issue

ATTO 7600N/7500N FibreBridge would not boot after firmware upgrade.  After booting we found that there was a duplicate IP Address.

          00DAAA 12:50:49 10/29/20 CRIT Address fe80::210:86ff:fead:affe%1 for MP1 already in use

 

Example:

00DAA7 12:50:44 10/29/20 WARN Ethernet Link Reset on MP1 due to excessive traffic
00DAA8 12:50:44 10/29/20 INFO Ethernet Link Down on MP1
00DAA9 12:50:48 10/29/20 INFO Ethernet Link Up on MP1
00DAAA 12:50:49 10/29/20 CRIT Address fe80::210:86ff:fead:affe%1 for MP1 already in use
00DAAB 12:50:49 10/29/20 CRIT Software Interrupt Exception Detected (SWI) (007A)
00DAAC 12:50:49 10/29/20 CRIT Instr Address    = 001cf37c
00DAAD 12:50:49 10/29/20 CRIT SWI Number       = 0x000000
00DAAE 12:50:49 10/29/20 INFO Software Interrupt
00DAAF 12:50:49 10/29/20 INFO 10/29/2020 12:50:49
00DAB0 12:50:49 10/29/20 INFO ST[3e9d8000-3e9d9000] | FP[3e9d8b14] CPSR[60000193]
00DAB1 12:50:49 10/29/20 INFO 00141570<-0025a440 | SP[3e9d8b18] FP[3e9d8b74]
00DAB2 12:50:49 10/29/20 INFO 0025a374<-00000580 | SP[3e9d8b78] FP[3e9d8bbc]
00DAB3 12:50:49 10/29/20 INFO 001cea38<-0036caac | SP[3e9d8bc0] FP[3e9d8d2c]
00DAB4 12:50:49 10/29/20 INFO 0036c9b8<-003a92f0 | SP[3e9d8d30] FP[3e9d8e2c]
00DAB5 12:50:49 10/29/20 INFO 003a8c0c<-0037f054 | SP[3e9d8e30] FP[3e9d8e5c]
00DAB6 12:50:49 10/29/20 INFO 0037f004<-0037fb38 | SP[3e9d8e60] FP[3e9d8e6c]
00DAB7 12:50:49 10/29/20 INFO 0037fac8<-003607dc | SP[3e9d8e70] FP[3e9d8fac]
00DAB8 12:50:49 10/29/20 INFO 003606b8<-003615dc | SP[3e9d8fb0] FP[3e9d8ffc]
00DAB9 12:50:49 10/29/20 INFO 00360cf0<-003debe0 | SP[3e9d9000] FP[3e9d9000]
00DABA 12:50:49 10/29/20 INFO Exception occurred. Possible redundant preceding log entries
00DABB 00:00:05 01/01/00 INFO Reset.  HW Code: Software Warm
00DABC 00:00:05 01/01/00 INFO Reset.  Reason: Critical Software Error Detected
00DABD 12:52:28 10/29/20 SYS  System date has changed. Current date:[10/29/2020]
00DABE 12:52:28 10/29/20 INFO Boot/reset occurred (007A)
00DABF 12:52:28 10/29/20 INFO Checkpoint 43 B:0 S0:0:0 S1:0:0 D0:0 C:0 O:0 I:

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.