SAN Issues
Highest rated
(rating)- CONTAP-555722: 'network interface show' command is slow
- CONTAP-437623: VMs may crash or fail to boot on ESXi with VMID enabled and QLogic SCSI-FCP target adapters
- CONTAP-226393: SCSI-3 Persistent Reservation (PR) registrations may be inconsistent on vVol-backed Windows Server Failover Cluster (WSFC) shared disks Inconsistency in VMWare ESXi 8.x OS Environments
- CONTAP-355932: Switch port shows as "unknown" under sysconfig -a
- CONTAP-366706: ONTAP FC target with Qlogic report REJECT to initiator
- CONTAP-368743: MetroCluster CRS doesn't replicate vdiskTable entries
- CONTAP-370588: After SM-as relationship deleted with base snapshot release LUN TPG IDs are reported incorrectly
- CONTAP-375017: DRCGFM - Cannot change the home-node or home-port of an active SAN or NVMe data LIF
- CONTAP-373077: ONTAP data collector in DII/OCI failing with Loop detected in next() for fcp_port
- CONTAP-382953: iSCSI initiator cannot login to LIF belonging to an access list following a LIF move
- CONTAP-385830: Snapshots being taken at Consistency group and volume level
- CONTAP-405912: ONTAP cluster node reboots unexpectedly
- CONTAP-411060: Hosts incorrectly showing Partially or None connected in ONTAP System Manager
- CONTAP-413134: Node panic when updating igroups
- CONTAP-589678: SAN FC HOST IO Errors during Autosupport
Recently updated
(date updated)- CONTAP-503989: Due to timing within ONTAP NVME/TCP stack host may require manual intervention to reconnect to storage after giveback
- CONTAP-297047: Some initiators shown as not logged in for igroups
- CONTAP-97744: Fabric Notification support is disabled on legacy QLogic adapters
- CONTAPEXT-2693: ESXi 8.0U3 and 9.0 NVMe/TCP kernel crashes observed when CG goes into OOS state
- CONTAP-73217: "Unable to perform management operations on the LUN due to ontap allowing duplicate initiator names, resulting in duplicate LUN IDs"
- CONTAP-79893: Emulex FC adapters with certain firmware versions might lead to parity errors
- CONTAP-87189: SVM DR fails with "NVMe over Fabrics is not supported in a Vserver with Vserver DR configured" error
- CONTAP-555722: 'network interface show' command is slow
- CONTAP-58084: LUNs created using an ONTAP release earlier than 8.3 might cause a disruption at snapmirror destination
- CONTAP-585424: Host has active/optimized paths to SVM not configured as proximal
- CONTAP-58732: System reboots unexpectedly with "integer divide fault" after 994 days of uptime
- CONTAP-589678: SAN FC HOST IO Errors during Autosupport
- CONTAP-590438: SFO Giveback fails due to offline application: scsi blade
- CONTAP-478107: SnapMirror active Sync (SM-as) cross CG storage vMotion or clone using XCOPY results in failed VM
- CONTAP-528735: scsi blade offline causing outage
Recently added
(date created)- CONTAPEXT-2693: ESXi 8.0U3 and 9.0 NVMe/TCP kernel crashes observed when CG goes into OOS state
- CONTAP-555722: 'network interface show' command is slow
- CONTAP-585424: Host has active/optimized paths to SVM not configured as proximal
- CONTAP-589678: SAN FC HOST IO Errors during Autosupport
- CONTAP-590438: SFO Giveback fails due to offline application: scsi blade
- CONTAP-437623: VMs may crash or fail to boot on ESXi with VMID enabled and QLogic SCSI-FCP target adapters
- CONTAP-439283: Modifying management LIFs causes unit attention
- CONTAP-447159: Volume deletion reports warning "Unable to list entries for kernel on node"
- CONTAP-449716: QoS throttles prematurely before limits.
- CONTAP-478107: SnapMirror active Sync (SM-as) cross CG storage vMotion or clone using XCOPY results in failed VM
- CONTAP-503989: Due to timing within ONTAP NVME/TCP stack host may require manual intervention to reconnect to storage after giveback
- CONTAP-528735: scsi blade offline causing outage
- CONTAP-366706: ONTAP FC target with Qlogic report REJECT to initiator
- CONTAP-368743: MetroCluster CRS doesn't replicate vdiskTable entries
- CONTAP-370588: After SM-as relationship deleted with base snapshot release LUN TPG IDs are reported incorrectly