Skip to main content
NetApp Stage KB

Multiple disk checksum errors seen only against MCCIP remote disks

Views:
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

Applies to

  • Metrocluster IP

Issue

  • The following multiple disk checksum errors/alerts are seen only against the remote disks of the MCCIP system

9/5/2021 02:55:45   node-02     EMERGENCY     callhome.hba.failed: Call home for Write Verification Error: Port 0m Failed. Keep the adapter offline and contact NetApp technical support for assistance.
9/5/2021 02:55:45   node-02     ALERT         disk.checksum.offlineAdapter: Adapter 0m taken offline due to checksum verification failure on multiple disks. Keep the adapter offline and contact Contact NetApp technical support. for assistance.

Sat Sep 04 01:14:17 -0500 [node-01: raidio_thread: raid_rg_readerr_repair_cksum_error_1:notice]: params: {'disk_rpm': 'N/A', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA54', 'shelf': '51', 'disk_info': 'Disk /aggr1_node_01/plex1/rg0/0m.i1.7L60P1 Shelf 51 Bay 3 [NETAPP   X357_SLNGE3T8ATE NA54] S/N [HLY05C1111111]
Sat Sep 04 18:09:56 -0500 [node-01: disk_server_0: disk_checksum_verifyFailed_1:alert]: params: {'vol': '------', 'diskName': '0m.i1.7L42', 'bno': '180189583', 'block': '0', 'fileid': '-1'}
Sat Sep 04 22:47:23 -0500 [node-01: raidio_thread: raid_rg_readerr_repair_cksum_stored_1:notice]: params: {'disk_rpm': 'N/A', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA54', 'shelf': '1', 'disk_info': 'Disk /aggr0_node_01/plex8/rg0/0m.i1.7L3P3 Shelf 1 Bay 2 [NETAPP   X357_S16433T8ATE NA54] S/N [S3SGNF0KB01111111111]
Sat Sep 04 22:47:23 -0500 [node-01: raidio_thread: raid_rg_readerr_repair_cksum_error_1:notice]: params: {'disk_rpm': 'N/A', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA54', 'shelf': '1', 'disk_info': 'Disk /aggr0_node_01/plex8/rg0/0m.i1.7L3P3 Shelf 1 Bay 2 [NETAPP   X357_S16433T8ATE NA54] S/N [S3SGNF0KB01111111111]
Sat Sep 04 23:47:23 -0500 [node-01: config_thread: callhome.checksum.multiple:alert]: Call home for CHECKSUM ERROR (multiple disks)
  • The errors are seen on both MCCIP clusters

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
42629ffb-1d15-4e3f-9f4f-5d08e2264d7b