Skip to main content
NetApp Stage KB

MetroCluster IP cshm ClusterIfIslDownWarn_Alert

Views:
1
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

Helpful 

Applies to

  • MetroCluster IP
  • ONTAP 9
  • Cisco switches

Issue

  • EMS logs show message:

[Cluster01-N01: cshmd: hm.alert.raised:alert]: Alert Id = ClusterIfIslDownWarn_Alert , Alerting Resource = Cluster01-SW01(FOC12345AU0)/port-channel1 raised by monitor ethernet-switch

 
  • system health alert show shows alert:
Monitor           ethernet-switch
Alert ID          ClusterIfIslDownWarn_Alert
Alerting Resource Cluster01-SW01(FOC12345AU0)/port-channel1 & Cluster01-SW02(FOC54321AU0)/port-channel1
Subsystem         Switch-Health
Corrective Actions      1) Check whether the cable is fully inserted into the interface port on both ends.
2) Reconnect the ISL port using another cable. After reconnecting it, verify whether the link of the ISL port is up by executing the commands per the switch configuration guide or by checking whether the Link status LED is on.
 
  • The switch command show-port channel summary shows no member ports in the port channel:
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
Channel
--------------------------------------------------------------------------------
1     Po1(SD)     Eth      NONE      --
10    Po10(SD)    Eth      NONE      --
11    Po11(SD)    Eth      NONE      --

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
c638d09a-cdaf-4d54-84f9-cb21b2d2bd85