Skip to main content
NetApp Stage KB

Disks are not visible under FC port, when viewed in "sysconfig -a"

Views:
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

 

Applies to

  • ONTAP 9.3P19 and earlier
  • ONTAP 9.5P13 and earlier
  • ONTAP 9.6P9 and earlier
  • ONTAP 9.7P5 and earlier
  • NetApp MetroCluster
  • High-availability (HA)
  • Switch SFPs, Atto FibreBridge SFPs and Storage System SFPs are working correctly
  • Zoning is correct

Issue

Disk information does not show up under one FC port in "sysconfig -a".

Example:

    slot 2: FC Host Adapter 2b (Emulex XE201 rev. 48, N-port, <UP>)
        Board name:        111-02451
        Serial Number:     FC75033066
        Firmware rev:      11.2.219.4
        Host Port Id:      0x60100
        FC Node Name:      2:000:00109b:3aa6b6
        FC Port Name:      1:000:00109b:3aa6b6
        SFP Vendor:        BROCADE
        SFP Part Number:   57-0000088-01
        SFP Serial Number: HAA2174910020G5
        SFP Capabilities:  4, 8 or 16 Gbit
        Link Data Rate:    16 Gbit
        Switch Port:       SW_A2:1   
    slot 2: FC Host Adapter 2c (Emulex XE201 rev. 48, N-port, <UP>)
        Board name:        111-02451
        Serial Number:     FC75033066
        Firmware rev:      11.2.219.4
        Host Port Id:      0x50200
        FC Node Name:      2:000:00109b:3aa6ba
        FC Port Name:      1:000:00109b:3aa6ba
        SFP Vendor:        FINISAR CORP.
        SFP Part Number:   FTLF8529P3BCV-EM
        SFP Serial Number: PY71LMS
        SFP Capabilities:  4, 8 or 16 Gbit
        Link Data Rate:    16 Gbit
        Switch Port:       SW_A1:2
        SW_A1:7.126L79 : NETAPP   X371_S163A960ATE NA51 915.4GB 520B/sect (S396NX0JC34830)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
9c4ce355-007c-47d1-a2ec-8dd35aabc007

 

  • Was this article helpful?