Skip to main content
NetApp Stage KB

How to configure AutoSupport for E-Series systems

Last Updated:

Applies to

  • E-Series Controller Firmware 7.xx
  • SANtricity


The E2800 and E5700 storage arrays include embedded ASUP functionality, rather than relying on an externally installed Event Monitor (agent provided with SANtricity Storage Manager) to configure and monitor AutoSupport (as does the E2700, E5600, and EF560 storage arrays). Because of the differences in the E2800 and E5700 storage arrays, there are different management methods for configuring AutoSupport across the two kinds of arrays. 

The procedure can also be found in our online documentation for the different platforms: E2600/E2700-E5500/E5600  and E2800-E5700.

This article contains a KB TV video that demonstrates the steps contained in this article to configure ASUP in legacy platforms using SANtricity Storage Manager.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.