Skip to main content
NetApp Stage KB

Hardware

  1. Last updated
  2. Save as PDF

Hardware

Other Resources

Here is some sample text for the Resolution Guides tab.

  • What is the best practice for power-off or maintenance on a SolidFire cluster?Wed, 11 Jan 2023
  • What is the size limit for volumes in SolidFire?Wed, 11 Jan 2023
  • Why does H610S boot automatically when reconnecting the power cable?Wed, 11 Jan 2023
  • Node services are hung and all drives become available after a Correctable ECC errorWed, 11 Jan 2023
  • NVDIMM errors on H610S node upon first bootWed, 11 Jan 2023
  • NVRAM device has incorrect activeFirmwareVersion of version 2.11Wed, 11 Jan 2023
  • PANIC bora/vmkernel/main/dlmalloc.c:4924 - Usage error in dlmalloc on H410CWed, 11 Jan 2023
  • Physical location of drive and WebUI display are mismatchedWed, 11 Jan 2023
  • Power supply failure on NetApp H Series nodesWed, 11 Jan 2023
  • PSU status shown as "Not Present" but no issues at the host itselfWed, 11 Jan 2023
  • Recurring PSU events on H410SWed, 11 Jan 2023
  • Reset the BMC to factory default on a uninstalled nodeWed, 11 Jan 2023
  • RTFI failed with error "Cannot find valid solidfire install image"Wed, 11 Jan 2023
  • Storage node with ext4-fs error on the consoleWed, 11 Jan 2023
  • System Asset and Tag ID is missing on ESXi 7.0u2 on H-Series PlatformsWed, 11 Jan 2023
  • Unable to launch BMC remote console with "Connection failed. Closing the Viewer."Wed, 11 Jan 2023
  • Unable to power on compute nodes and view BMC GUI Java console after RTFIWed, 11 Jan 2023
  • VMWare ESXi reports "Lost path redundancy" and node turns unresponsive nodeWed, 11 Jan 2023
  • What does the SolidFire AIQ event iSCSI session reinstatement count increase mean?Wed, 11 Jan 2023
  • Is LLDP enabled on iDRAC/BMC port of SolidFire storage nodes?Wed, 11 Jan 2023
  • How to configure the SNMP in BMC for H61xC or H610SWed, 11 Jan 2023
  • HCI compute host crashed with uncorrectable CPU errorWed, 11 Jan 2023
  • How to troubleshoot Purple Diagnostic Screen after memory read errorsWed, 11 Jan 2023
  • NVIDIA vGPU manager in ESXi 6.5 returns an errorWed, 11 Jan 2023
  • NetApp H410C compute node has CATERR alert and not respondingWed, 11 Jan 2023
  • Unable to launch BMC remote console with "Connection failed. Closing the Viewer."Wed, 11 Jan 2023
  • Are any configuration changes required for volumes exceeding 20,000 IOPs?Wed, 11 Jan 2023
  • Creating or modifying a volume fails with "totalSize must be less than 17592186044416"Wed, 11 Jan 2023
  • ESXi Datastores showing error "Device or Filesystem with identifier xxx has entered the All Paths Down state"Wed, 11 Jan 2023
  • H410S BMC remote control Connection FailedWed, 11 Jan 2023
  • H610S fanSensor alert "PSx Fan RPM is failed or missing"Wed, 11 Jan 2023
  • H610S Reporting fault for incorrect bios setting "Current IPMI over LAN"Wed, 11 Jan 2023
  • H610S RTFI via BMC virtual media failureWed, 11 Jan 2023
  • H610S: erroneous NVRAM error messagesWed, 11 Jan 2023
  • H615C - NVIDIA Tesla T4 shown as 32 separate GPUs in ESXi 6.7Wed, 11 Jan 2023
  • How to gather BMC Version, Hardware and Sensor Details from a H610/H615 BMC SMASHLITE SCORPION CLIWed, 11 Jan 2023
  • NDE couldn't validate jumbo frames on compute nodesWed, 11 Jan 2023
  • 'Node DIMM initialization fail' error on NetApp H6xxWed, 11 Jan 2023
  • AutoSupport Message: Network interface eth down or cable is unpluggedWed, 11 Jan 2023
  • What is the best practice for power-off or maintenance on a SolidFire cluster?Wed, 11 Jan 2023

Add code for Video content

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.